Swimming pool maintenance and matters needing attention of the support
Play is a set research and development, production, sales for the integration of large-scale amusement equipment production enterprise, specializing in the production of large children rushed off equipment, parents rushed off equipment, land children rushed off equipment, children rushed off carnival, stent pool, stents, pool, mobile water park, inflatable castles, inflatable slide, inflatable pool, inflatable swimming pool and other facilities equipment, 24 hours of unified national service hotline: 400 -
2223, welcome your inquiry!
Investment stents in recent years, a lot of people swimming pool, because of its low cost, high yield, and is not subject to space limitation, favored by many investors, but most investors do not know how to maintain the stents pool, thus greatly shorten the lifespan of the swimming pool!
Then using stents pool should pay attention to what, and how to correct maintenance?
Support the swimming pool is made up of steel and add combination gathering originative ether (PVC PVC fabric.
Subject for steel pipe support, the pool body pool use special nylon choreography double-sided high-frequency welding heat and forming PVC coated cloth.
Tear strength 400 n, the tensile strength of 3478 n/cm)
, friction resistance, anti-aging, nice appearance, etc. , and set up the convenience, the use of safe, clean, without special venue.
Regular rectangular shape for stent swimming pool, can also according to the site size, customized fit the dimensions of the site.
Steel frame always scrub with wet cloth, keep clean, avoid steel rust off paint.
Maintenance of PVC fabric, embodied in the daily application of water circulation system, keep stents pool water clean, each quarter after the use, the bottom of the pool to erase and communities and then air dry wind, packaged into the Treasury.
Please repair as soon as possible if it is found that there is any breakage place, fix the first shearing patches.
Patches should be cut into repair area three times the size, it is best to round or oval.
Then render rubber processing, such as glue dry after playing fill glue to dry just now repair area and patches again, evenly coated with a special glue in top with smooth weight pressing can be used 24 hours a day.
On level ground, clean pool, pool near the pool from the bottom up, in turn, insert the stents, upright on the ground, and the water pipe in the automated water purification machine;
After injection water before the cold water, hot water injection, and open the automated water purification machine to filter the water, make up and down the pool water temperature, through the thermometer temperature measurement, temperature control at 35 ℃ or so;
Stents when swimming pool water depth as feet don't touch the bottom shall prevail;
Draw off when not in use, will immediately, long time storage, water may be contaminated, even corrosion stents pool, this will shorten the service life of the product.
Recommended reading: the use of inflatable slide note you know?