Inflatable toy in front of the inflatable should pay attention to check what place?

by:Powerful Toys     2020-04-02
Inflatable toy products common failures and troubleshooting methods: 1, inflatable toys and paste requirements: first in toys and cloth evenly daub glue to paste, then left to half a minute, the cloth sample paste paste, don't become warped edge, after pressing finished paste. 2, inflatable toys are cut, the cut is longer than 5 cm in needle stitched, or with a cloth and cloth paste. Row piece in 5 cm paste directly is then. 3, inflatable toys seam line: first the openings with needle and thread stitched flat, ( Or from the bottom of the air cushion apart into and stitched) , processes the openings available paste, considered at the same time beautiful 4 become warped edge, inflatable toys beautification place: with this small blush at become warped edge daub proper amount of glue, pressing pressure, after a pause can be pasted firmly 5 degumming, inflatable toys: part of the easily worn parts after long time use degumming, cut into different modelling in available fabric in the degumming paste can be 6, large inflatable toys air leakage: toys after using for a long time, because of some parts pinhole seam widening, air leakage, can consider to use cloth paste in juncture place, reduce the air leakage, such as toy is too old, should consider to scrap, case management problems. 7 local abnormal bulge mattress, inflatable toys: generally refers to pull wipes tear open, from the air cushion can be unwrapped at the bottom of the air cushion along the seam, the brace with needle and thread connected with air cushion, and then paste with a cloth, protective seam. 8 deflated prior to maintenance of common sense, inflatable toys toy, with half dry towel to clean the surface of the toy, after air vent, folding place cool and clean place custody; If toy storage into the water, in the case of can't row of net, dry and ventilated place blow, air until boiled water, water storage of avoid by all means; Blower should be stored in dry ventilated place, in case of be affected with damp be affected with damp; Toy store for a long period of time, regularly check the presence of be affected with damp be affected with damp, should blow in ventilated place and wipe clean: please in strict accordance with the above requirements, sparing maintain your toys, plastic toys factory yiwu ShenYi plastic products co. , LTD. , specializing in the production of inflatable toys, inflatable pool, swimsuit, floating row, children's castle, inflatable sofa, inflatable ball, inflatable tumbler, inflatable toy is their main product, welcome to inquire price of inflatable pool, inflatable pool wholesale.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...